Why not use the USB cable to computer? My RJ45 goes to P3. And, yes, it must be seated firmly.
Sent from my iPhone ...nr4c. bill > On Jan 27, 2019, at 2:12 PM, KENT TRIMBLE <[email protected]> wrote: > > Another "gotcha" is forgetting to reset the RS232 baud rate. > > This bites me after every FD because N1MM is different from my Palstar > AT-AUTO. > > 73, > > Kent K9ZTV > > >> On 1/27/2019 9:00 AM, Mike Greenway wrote: >> . . . so if you use the RJ45, even though the RJ45 appears to be in fully, >> if you have com port communication problems to your computer or cant talk to >> your P3, see if you hear that faint “last click” in the RJ45. It is not >> just my particular K3S, I have seen the same situation on a second one. > > > > --- > This email has been checked for viruses by AVG. > https://www.avg.com > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
