Hold the ATU TUNE/ATU switch until it says BYPASS. That takes the ATU
out of the RF path. If you don't have SWR on the left of the bottom
line of the S-Meter, hold DISP/METER to switch to it. Press key, read SWR.
73,
Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County
On 2/4/2019 3:29 PM, JOHN MCBRIDE wrote:
I am the new owner of the Elecraft K3 and there is a lot to learn. The first
question is how to check the SWR without the ATU so the antenna can be as close
to resonance as possible (other than an external SWR meter)?
John NL7NK
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
--
This message has been scanned by E.F.A. Project and is believed to be clean.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
