Thanks to Dave W6ZL
CONFIG | FSK POL
Will WC2L
On 2/9/2019 11:12 AM, William Liporace wrote:
I have a K3s (upgraded K3) and K3S (factory built).
Keying is being done with a MORTTY device. I tested with MMTTY and
N1MM+/2Tone.
The K3s is working just fine. So I understand the setup. Same
programs, same setup, but NO ONE can decode the K3S. All I see is
gibberish in the Window during TX. As far as I can tell, it is setup
identically. I have gone through the Fred Cady book.
What am I missing?? Suggestions??
TNX Will WC2L
--
William Liporace WC2L
http://www.wc2l.com or http://dxc.wc2l.com
AR-Cluster Node telnet dxc.wc2l.com or 144.93 MHz
[email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
