Run one instance of KPA1500 Remote on a computer that's always running at the radio site. Tell it the COM port for the KPA1500 and Start Hosting Remote. Specify the Server Setup parameters; the critical one is TCP Port which must also be set up in your Internet router for *port forwarding*. Each router model and firmware release may have a different way of setting this up; sorry.
At the control site, run another instance of KPA1500 Remote, typically on your logging computer, and tell it to Connect. Specify matching parameters including that Internet port number. Port forwarding isn't required on the control side. If you have it all specified correctly, the control site instance will connect to the radio site instance and work beautifully. At least, it does for me. Great program! 73, /Rick N6XI -- Rick Tavan Truckee, CA On Mon, Feb 11, 2019 at 7:19 PM Rich Yost via Elecraft < [email protected]> wrote: > I also cannot get the KPA1500 Remote to function over the internet (WAN) > I even put it into a DMZ with no luck. > > works great on my LAN > > Does anyone have any directions on how this is to be setup ? > > Can't someone make a mobile app that works ? > > Rich > n2ry > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
