Hello, Please disregard my yesterday's email.
I fired up the system today and everything works, which is a surprise since no changes were made. I have no explanation for this right now but will attempt to see if the port was shut-off; Dave-AA6YQ cautions about that from time to time. I thought I had done that operation a long time ago but maybe all the MS-updates messed that up. Sorry to take up the bandwidth. 73 Jerry KM3K > On February 22, 2019 at 10:39 PM JEROME SODUS <[email protected]> wrote: > > > Hello, > > I want to set-up DX-Lab for two radios, namely my Yaesu FT-950 and the > KX3. > > No problem with DX-Lab controlling the FT-950. > > (I do know that the KX3 has communicated with the KX3-Utility program > today, so that tells me the USB connection works.) > > But DX-Lab and the KX3 are not talking to each other, so here are my > settings for the KX3 in DX-Lab: > > Port....7 > > Baud....38400 > > Word....8 > > Parity....N > > Stop....1 > > DTR....N > > RTS....Y > > Also, in Device-Manager, flow-control is 'None'. > > Am I ok here or should I be looking elsewhere? > > TIA for any reply. > > 73 jerry km3k > > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
