The K3 AFSK TX filter is a very tight filter around the two RTTY tones, which blocks all other frequencies in the passband. Are you intending to transmit something other than RTTY when the blocking occurs?
Ed W0YK -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Ed G Sent: 24 February, 2019 10:41 To: [email protected] Subject: [Elecraft] K3 AFSK TX Filter After switching on the AFSK TX filter in the CONFIG menu, I find that the filter essentially blocks all the soundcard audio from being transmitted by the K3, so that I have no output with the filter switched on. Line In gain settings are correct per recent suggestions by Joe, W4TV, and all other K3 settings are proper. When I turn off the AFSK TX filter, the K3 returns to operating normally in AFSK Data mode, with full power output. I can leave the filter out but am wondering why it is blocking the audio? I am using MMTTY, so perhaps it is a setup issue within that program? --Ed- Sent from Mail for Windows 10 --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
