Check the Power Set Per Band setting in the K3 config menu. Should not
be set to NORmal.
73
Bob, K4TAX
On 2/24/2019 2:07 PM, Jim McCook wrote:
One of the features I liked with the K-3/KPA-1500 combo was having
power setting in the K-3 remain at 100w for barefoot or amplifier STBY
position. When the KPA-1500 was set to OPER, the power from the K-3
reverted to the low drive level, such as 32w. Now it remains at one
power setting either way. I can't figure out what caused that
change. The cable between both units is secure in place and they are
communicating with each other. As I tune the K-3 the KPA-1500 tuner
settings change normally. Any idea why this changed? -Jim
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
