Check CONFIG:TX MON, to see if it is set to NOR or FAST (FAST should have no "distortion", because you hear unprocessed MIC audio, with no delay). This applies to both your own MIC audio and KDVR3 recordings.
Check also CONFIG:TX DVR. Is it set to NOR or IND? If IND, there are two different monitor levels, one monitor level for your own voice spoken live into the MIC, and a second level that adjusts the DVR message monitor level (Voice Memories). Perhaps the latter is set too high? With CONFIG:TX DVR set to IND, You have to hold down the MON knob a second time to alternate between adjusting DVR MON level and the MIC MON level. If that's not it, check if adjusting the CMP level during playback makes any difference. Is it also possible that RF is getting into your headphones? Does it go away when you use a dummy load? 73, Bob, N6TV On Sun, Mar 3, 2019 at 10:32 AM Gmail <[email protected]> wrote: > When I play a recorded message audio transmitted is ok , confirmed by > listeners and monitoring remote SDR. > What I hear in my earphones with monitor turned on is distorted. > Ray > W8LYJ > > Sent from my iPad > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
