Hi Jim, If you figure it out please let us know. I have the same problem with a Win 7 machine. Everytime I start the software I must turn the W2 off then back on for it to be detected even though the software sees the com port.
73 Tim, KQ8M [email protected] -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Jim Spears Sent: Thursday, March 7, 2019 08:34 To: [email protected] Subject: [Elecraft] W2 connection issues I have two W2 units that I use with different K3's and different W10 computers. One of them is reluctant to connect when I start up the W2 utility program. So I power the W2 off and back on with the utility program active and it connects just fine. This is consistent behavior. The other seems to be able to connect just fine. I have not spent any time trying to figure out why one requires the off/on sequence but just live with it. There may something in the physical connection to the computer. i.e. through a USB port, through a COM port, etc. Jim/N1NK ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
