Is this a dynamic mike with the bias turned on? If so, turn the bias
off. I trust this is a mike connected to the MIC input on the front of
the radio. If you are using the front mike input and something is
connected to the rear MIC input, unplug what ever is connected to the
rear input.
Good luck in the VA QSO party. There's lots of activity.
73
Bob, K4TAX
On 3/16/2019 1:57 PM, Buck wrote:
I never use a microphone so here I am today trying to run voice in the
Va QSO party.
When I key the mic, I get a burst of noise that lasts maybe a half
second. It does this even if I have the rig in "test" mode ie. no
transmit. So, I don't think it is RF.
I have tried adjusting the mic gain and changing mics - no luck. It
does the same thing using VOX except the noise cycles about every half
second.
Anyone have an idea?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
