Ok, thanks Joe, Dave wo2x
Sent from my iPad > On Mar 21, 2019, at 9:47 PM, Joe Subich, W4TV <[email protected]> wrote: > > > > YouCAN share the CAT connection from the K3S USB via a program called > > VSPE. Works very well. > > VSPE does not work well (if at all) with either N1MM Logger+ or DXLab > Suite Commander - particularly if the SDR or Omni-Rig is polling at > the same time as N1MM+ or Commander as both N1MM+ and Commander use > nearly 100% of the transceiver CAT bandwidth in order to provide the > fastest possible response (minimum lag). > > 73, > > ... Joe, W4TV > > >> On 2019-03-21 7:26 PM, [email protected] wrote: >> Pete, >> YouCAN share the CAT connection from the K3S USB via a program called VSPE. >> Works very well. >> Give me a call tomorrow to discuss. >> Dave wo2x >> -----Original Message----- >> From: [email protected] <[email protected]> On >> Behalf Of Peter Dougherty >> Sent: Thursday, March 21, 2019 7:00 PM >> To: 'Joe Subich, W4TV' <[email protected]>; [email protected] >> Subject: Re: [Elecraft] Sending AFSK RTTY--FIXED >> Yes, you're right, and I will miss the ability to have multiple CAT >> connections...that's a biggie and the ability to mute the mic on .wav >> playback as well. I should have said that I have (almost) all the >> functionality that I had before for the features that I use. At this point, >> I'm trying to simplify things for the next couple of months, get things >> working reliably, then introduce an SDRPlay, Skimmer, and Win4K3 after >> Dayton. >> I do miss the Winkeyer's speed control knob, but I can get used to just >> using N1MM PageUp/Dn keyboard commands or the K3s's front panel control >> knob. I had a great run with the MK and MK-II over the years and yeah, there >> are a few things I'll miss, for sure, but the reduced complexity--both >> physical and software/PC related, and reduced potential for RF ingress are >> substantial positives as well. >> - pjd >> -----Original Message----- >> From: [email protected] <[email protected]> On >> Behalf Of Joe Subich, W4TV >> Sent: Thursday, March 21, 2019 3:52 PM >> To: [email protected] >> Subject: Re: [Elecraft] Sending AFSK RTTY--FIXED >> On 2019-03-21 1:52 PM, Peter Dougherty wrote: >> > Again, a big thank you to everybody who lent a hand to this. One final > >> question, does the USB audio connection from the K3s separate out the > >> main and sub receiver audio in the same manner as using a physical > audio >> breakout cable two and 3.5mm plugs? >> Yes, the K3/KIO3B or K3S USB Audio CODEC behaves exactly like the K3 with >> analog Line In/Line Out. The USB Audio CODEC is essentially "grafted on" to >> the Line In/Line Out. In fact "Speaker (USB AUDIO CODEC)" is connected in >> parallel with the analog Line Out jack. >> Please refer to the K3S Owners Manual and the K3S schematic package on-line. >>> I seem to have all the functionality I had previously with the >> > MicroKeyer-II in line >> Not by a long shot ... you no longer have a hardware based FSK, a K1EL >> WinKey keyer, support for multiple CAT connections (for syncing an external >> SDR panadapter), the ability to mute the microphone when playing an SSB >> voice file, access to dedicated CI-V and/or SteppIR control channel, etc. >> While you may not have used all those features you certainly do not have the >> same functionality as you had with the microKEYER II. >> 73, >> ... Joe, W4TV > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
