Dick and list, We have successfully updated the firmware for the DSP and the MCU. The problem occurred as we were trying to install with the KXPA100 in line. I removed it and connected the computer directly to the KX3 and all went well. Later, we were able to connect the KXPA100 and confirmed that the KXPA100 has the latest firmware.
Thanks to Dick and all of you who monitor this list and contribute support. 73, Dave, K4TO On Sun, Mar 24, 2019 at 5:10 PM Dave Sublette <[email protected]> wrote: > We were doing a firmware update (my son and I). All went well until the > KX3 became stuck in the MCU LD condition. We followed the manual > instructions (several times). > > The KX3 is still stuck and the computer cannot find the KX3 port. The > computer recognizes the cable, but communications fail with the KX3. > > We have rebooted the computer and restarted the KX3 utility without > success. The Kx3 utility is the latest. We successfully downloaded it and > installed before we started. > > What can we do next? > > Dave, K4TO > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
