Awesome, thanks!

On Mon, Apr 1, 2019 at 1:20 PM Eric Swartz - WA6HHQ, Elecraft <
[email protected]> wrote:

> Hi Brad,
>
> I apologize for the confusion on this.
>
> The following K3/K3S menu entry enables the K3/K3S to send out the
> transmit frequency on the AUXBUS cable to the amp and external tuner.
>
> In the K3/K3S KAT3 menu item, tap the 1 key to set it to "KAT500=Y".
>
> It’s documented in the current shipping KPA1500 owners manual, Rev B1
> (2/12/19), on page 20 at the bottom. (Its also on the website.)
>
> Eric
> *elecraft.com <http://elecraft.com>*
>
> On 3/31/2019 2:47 PM, Brad Denison wrote:
>
> I am noticing that with my KPA1500 connected to my K3S via the aux cable
> that  XCVR FREQ always shows 0. All other functions between the rig and amp
> seem to work such as band changes and TX COUNT always shows the counted
> frequency.  XCVR FREQ is a constant 0 so any ideas from the group on if I
> have missed a setting somewhere to ensure that this works.  I am under the
> impression that the KPA1500 should be getting and displaying correct
> frequency info from teh K3S.
>
> Thanks,
>
> Brad
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[email protected] <[email protected]>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Reply via email to