Never mind. While the reboot of macOS did nothing, cycling the amp off then on seems to have gotten by the verification hang. Firmware installed successfully.
73/Gary W2CS > Begin forwarded message: > > From: Gary J Ferdinand <[email protected]> > Subject: [Elecraft] KPA1500 F/W 2.17 Install Hang > Date: April 3, 2019 at 3:40:29 PM EDT > To: elecraft <[email protected]> > > Not my first rodeo, but I must have fouled something up. I have the 2.17 > folder (containing the .hex and .rtf files) in the local folder for the > KPA1500 utility. The utility says it can talk to the amp. I tell it to > download the files. I get the usual firmware download window, but it hangs > on the “Verifying file “kpa1500fw217.hex” message. The hang has lasted over > 20 minutes now before I did a Force Quit. > > Suggestions? > > 73/Gary W2CS > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
