Also, in the Windows 7 sound card make sure your don't have Microphone
Boost checked. Forgot about that one.
73
Bob, K4TAX
On 4/3/2019 5:21 PM, Bob McGraw K4TAX wrote:
If you go into the K3S CONFIG menu to LIN OUT the normal value is
10. I suggest you back this down to 5. This will then allow the
Windows 7 Pro sound card slider to operate near mid range thus 0 dB
or 50% depending on how it is displayed.
73
Bob, K4TAX
On 4/3/2019 4:50 PM, HP wrote:
Is here any way in W7 to change the RX level when using the built in
USB K3S sound card . The W7 slider
goes to -10dB with a lot of care but next tap is -192 dB- In WSJT
this means I have LIN out set to 001 and
still a bit too high .?
Hank K7HP
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
