I don't expect to see it for the K3 but perhaps someday a K4 will have a
CW pitch adjustment that:
a) does not blank the received signals when you engage it as the current
sidetone pitch adjustment does;
b) keeps the signal centered in the passband while pitch is adjusted,
unlike when you adjust RIT or VFO to change a signal's pitch.
73,
Drew
AF2Z
On 04/04/19 20:19, Kidder, George wrote:
Two suggestions which can probably be added in firmware for K3 and K3s:
1) Allow different audio levels for speaker and phones, such as an
attenuation applicable to either.
2) Allow (but not require) the monitor level to be controlled along
with the receiver levels.
If either is already available for the K3, someone please let me know!
73 - George, W3HBM
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
