Using the correct port?
On 4/15/2019 5:47 PM, w4sc wrote:
Using FTDI USB from Elecraft, FTDI latest drivers, No HUB, Works with win7,
does not work with Win10.
Going back to Win 7.
Ben
Sent from Mail for Windows 10
From: Don Wilhelm
Sent: Monday, April 15, 2019 4:16 PM
To: w4sc; [email protected]
Subject: Re: [Elecraft] K3 Utility and Win 10
Are you using a USB to serial adapter? If so, have you downloaded and
installed the latest drivers for that adapter (if the Elecraft KUSB the
drivers are from FTDI). Reboot the computer after installation.
Use a USB port on the computer, not on a hub.
73,
Don W3FPR
On 4/15/2019 3:54 PM, w4sc wrote:
Having trouble with Win10 and K3 Utility communicating with K3. Latest K3
utility, and have tried 2 different Win10 machines, all latest updates. Tried
lower/higher speeds, no joy. Works FB win7. (tnx again Microsoft!!) Ideas
anyone??
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
