Hi all, Whenever I bring up WSJT-X and the radio goes into DATA mode (Data A), the audio through the speaker is extremely distorted and there is no decode at all. Soundcard RX Levels are about 30 dB. If I switch the radio into USB I can decode just fine, but not using the DATA mode. I haven't changed anything in the radio or software since the last time I used FT8, about a month ago. I've hardly even had the radio powered up for more than a couple of hours in the last month. Any idea what could have gone wrong, or where I can go to fix it? I'm sincerely hoping this is a software problem and that I didn't somehow harm the receiver.
I'm not using the Noise Blanker or Noise Reduction, AGC is set to either Fast or Slow, I'm on the main antenna, signals are very strong, and I've tried with and without the attenuator. Nothing shows up on WSJT's traces in Data mode. --------------------------------------------- 73 and Good DX Peter, W2IRT President, North Jersey DX Association DXCC Card Checker Letter O Manager, ARRL Incoming 2nd District QSL bureau ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
