The B VFO doesn’t do anything in diversity receive. Both receivers are driven by the A synth. B VFO is only used for a split transmit frequency if you want.
You are thinking of the VFO LINK mode where B follows A with a given split. Ken K6MR ________________________________ From: [email protected] <[email protected]> on behalf of Rich <[email protected]> Sent: Tuesday, April 30, 2019 2:41:01 PM To: [email protected] Subject: [Elecraft] Appears that VFO is not tracking in diversity. Have read the manual and the various postings here and can not find problem. When I turn on Diversity the B VFO does not track, and stays at the same freq. Know it was working 6 months ago. Is there an obvious setting that could not be correct? KC dot is flashing, Diversity ON comes up and then DIVERSITY flashes (sometimes). Arrow is pointing at A and SUB is on in display. Both receivers are working as determined by adjusting RF and AF Separately. Can tell it is in diversity while listening to a QSO as one seems louder in one ear and vs/vs. Any help appreciated. -- Sent from: http://elecraft.365791.n2.nabble.com/ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
