Hi, I recently installed a private K3-Remote System using my existing K3 and adding a K3/Ø Mini Control Panel. I have the RRIGSET and all required cables installed. I have tested the system and it appears to work well as I can both hear and control the remote radio and send CW on my straight key plugged into the back of the K3/Ø.
I would like to add the N1MM contest program using windows 10 Lap Top locally with a USB cable running from the USB socket on the front of the RRC to my Lap Top. I have configured both RRCs COM1 to: “Mode-7 CAT to COM2 (local & remote)”. The serial setting for COM1 has been set “Use USB Com Port as COM1” to YES. COM3 (extra) mode has been set to “Mode -8 Winkeyer”. RRC 1258 Ø (COM 1) RRC 1258 1(COM 11) RRC 1258 2 (COM 12) RRC 1258 3 COMExtra (COM 2) So far I have been unable to configure N 1MM to communicate with my K3 remote. COM 11 doesn’t work and COM12 produces unsolicited and random CW transmissions. COM2 make no difference. Interestingly, I can use my K3 remote with SKCCLogger with COM2. Any assistance would be greatly appreciated. 73 Charles N2SO -- *73, Charles N2SO* *Treasurer, Quarter Century Wireless Association, Inc.* *www.qcwa.org <http://www.qcwa.org>* ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
