John,
You apparently had some glitch in the computer to K3S communications
during the process. Go to the Help file in K3 Utility and look at the
instructions to "Force a Firmware Download" and follow the steps listed
there.
Once you get to the actual firmware download, do not interrupt it The
K3S will reset several times. If you get another computer glitch,
repeat the process.
73,
Don W3FPR
On 5/4/2019 8:15 PM, Jim N7US wrote:
I just tried to update the F/W in my K3S to 5.67 using the Utility (Rev
1.167.25) but it failed. The TX LED is slowly flashing, the display is off,
except for MCU LD.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
