The saga continues.
I am in the middle of building my very first breadboard project: a 10
MHz oscillator to test the K2. Got about half of the parts from
Radio Shack. Got the XTAL and a few other parts at Hosfelt Electronics.
For the Don,
I found two caps that were wrong in the bandpass area:
C12 was labelled 560 and should be 561 and
C4 was labelled 820 and should be 821
These appear to be order of magnitude differences so I HOPE their
correction leads me on.
I remember correcting myself during the build : 560 is 561 ... 820
is 821.
Can Someone (I don't know who...could it be DON?!) confirm that the
above is correct and makes sense?
If so, I'll order more caps.
Thanks again for all the help
(and everyone's patience with what is becoming a record-breaking thread)
John
AB8WH
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
