Hank,
Thank you for that tip! That was what I needed... Never thought of
tilting the unit forward!
I live in Oregon, it rains here all the time, and so humidity will not
be an issue, lots of that here!
Thanks again!!
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL Asst. Director, NW Division, Technical Resource
On 5/21/19 11:06 AM, Hank wrote:
Dave...
I have done this. I disconnected the unit and tilted it face forward quite a bit. I
removed 3 screws but left one loose in the bottom left hand corner. I rotated the
plastic face down and replaced 2 screws along the top of the screen. I then removed the
original "lose" screw and plastic cover and replaced the other lower right hand
side screw. I then cleaned up with a microfiber cloth and replaced the screen cover in
the reverse order - always keeping at least one screw in the display while tilted
forward. No issues for me.
I also planned around a high humidity environment in the house to reduce the
static cling. I turned the A/C off when I went to work while it was a warm
overcast day and when I got home it was about 80% humidity in the house - trust
me it makes a difference!
Hank
K4HYJ
----- Original Message -----
From: Dave Cole (NK7Z) ([email protected])
Date: 05/21/19 11:30
To: Elecraft Reflector ([email protected])
Subject: [Elecraft] P3: Removing the plastic display cover
Hello,
I have a bit of dust behind the plastic display cover on my P3, between
the case and the cover.
In reviewing the kit assembly instructions, it looks as if the four
screws on the four corners of the plastic display cover are also used to
hold the entire display board in place on the front panel. Is this correct?
It also looks like all I need to remove these four screws from the
front, while holding the entire display board in place from the rear, in
order to get the plastic display cover off for cleaning. Is this correct?
Are there any "surprises" in this process anyone knows of? Hidden
washers to drop, etc?
--
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL Asst. Director, NW Division, Technical Resource
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
