Slow down and think. I don’t know what the DRAWS HAT end looks like but the KX3 end(s) are identified in the manual.
The mic/PTT is 3.5 TRRS Phones is 3.5 TRS CW KEY is 3.5 TRS ACC (CAT) is 3.5 TRS I/Q out is 2.5 TRS Sent from my iPhone ...nr4c. bill > On May 21, 2019, at 6:43 PM, sambanks <[email protected]> wrote: > > I am putting together a portable Elecraft KX3 HF Digital radio station using > a Raspberry Pi/NW Digital DRAWS Hat and I need your help with: 1. > Determining what plug size/type (3.5mm or 2.5mm/ TRRS or TRRRS or something > else) is needed on the cable end that connects to an Elecraft KX3? 2. Where > the cable connects to on the Elecraft KX3 (Phone, MIC, RXI/O, or somewhere > else)? 3. Determining what plug size/type (3.5mm/ TRRS or TRRRS, DIN-6, or > something else) is needed on the cable end that connects to NW Digital DRAWS > Hat? 4. Where the cable connects to on the NW DIGITAL DRAWS Hat.Any > assistance you provide would be appreciated. 73Sam N5SIBSent from my Verizon, > Samsung Galaxy smartphone > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
