Hi all, some time ago also I reported that the MSG, PRE and ATTN buttons on my KX3 stopped working. I used them as I stored messages into bank 1 and 2 and few times I used to recall the mems but after some time the buttons stopped to response. No responding anymore > ON/OFF did not helped. Rest of buttons tested and works well.
I solved it with the same procedure which I recommended in this thread... thanks to Chris, VK5CP. The ribbon cable had to be re-seated. As I have clean pressed air available with several bars presure and -83deg C dew-point I also cleaned the connectors on the ribbon cable before installing it back. It helped > problem solved. Be sure that the ribbon cable is oriented with the long tab toward the speaker and all pins are engaged when you will put it back to your radio. If you have the similar sympthoms then try it first before more complicated actions. It is easy and can help in few minutes. ----- 73 - Petr, OK1RP "Apple & Elecraft freak" B:http://ok1rp.blogspot.com MeWe: https://bit.ly/2HGPoDx MeWe: https://bit.ly/2FmwvDt -- Sent from: http://elecraft.365791.n2.nabble.com/ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
