Jim,
It is likely to work OK even with the reduced PLL range.
If you want to correct it and gain some temperature stability for your
K2 at the same time, add the BFO upgrade modification - get BFOMDKT from
Elecraft.
That kit contains a new PLL crystal as well as parts for the BFO.
You can see older posts at Nabble.
73,
Don W3FPR
On 5/22/2019 12:25 AM, Jimithy66 wrote:
I am building an older QRP K2 kit ser. # 2438 Ver. A in
the Alignment and test section Part 11. pg. 57, the
PLL Ref. Oscillator Range Test is out of limits.
The Reference High and Low frequencies are OK with
readings (12100.53 high and 12089.43 low) with range
limits of 11.5 - 25 KHz but it is low, 11.1 KHz.
Is this a problem ?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
