I use #10 all copper which just fits the 30 amp if you twist them really neatly. It takes several tries to where no strands get away. We might warn folks about the copper clad aluminum that’s going around if you don’t read carefully.
Chuck Jack KE9UW Sent from my iPhone, cjack > On May 31, 2019, at 5:36 PM, Jim Brown <j...@audiosystemsgroup.com> wrote: > >> On 5/31/2019 10:32 AM, Don Wilhelm wrote: >> power pole with #12 wire about 3 inches long. Then splice onto that with >> #10 or #8 wire for the rest of the run to your power supply. > > I use #8 stranded THHN and the larger pins, but cut enough strands of the #8 > that it fits in the pins. > > 73, Jim K9YC > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
