Loaded Elecraft K3S 100W transceiver with sub-receiver and well equipped with filters for contesting, DXing and just fun. Note that the general coverage option permits 2200m and 630m as well. Since the 250Hz filters are actually around 370Hz I have them cut in at 350Hz and use them as my default filters for CW and RTTY. The 2.1Khz filter in the main helps in SSB contesting when the band is crowded. The 200 filters are often used on 160m to hear the faint DX or in contests to hear DX in the presence of nearby domestic stations. I got matched filters where needed to allow for diversity reception but never had antennas sufficient to try it.
P3 with SVGA option. This is like cheating in DX pileups! I'm the original owner for each and they've been well kept in a non-smoking environment. Both operating flawlessly. K3S-K S/N 10122 with all standard equipment plus installed options: KPA3A 100W power amp KAT3A Antenna tuner KRX3A Sub receiver KBPF3A General coverage RX filter module KTCXO3-1 TCXO 1 ppm f/w correction for 0.5 ppm K3EXREF Ext 10Mhz ref input KDVR3 Digital voice recorder KFL3A-2.7K 5 pole in Main RX KFL3A-2.7K 5 pole matched to main in Sub RX KFL3A-2.1K in Main RX KFL3A-250hz 8 pole in Main RX KFL3A-250hz 8 pole in Sub RX KFL3A 200hz 5 pole in Main RX KFL3A 200hz 5 pole matched to main in Sub RX KFL3B-FM 13Khz filter Main RX P3-F Panadater S/N 1811: Installed options P3SVGA P3 SVGA Adapter > Power cables for K3s and P3 Coax to connect K3S and P3 Control cables to connect K3S and P3 I prefer to sell as a combo but will consider offers for separates. Asking price for the combo $4300 shipped. Paypal OK as well as check. Jim AB3CV ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
