Why must you turn them off ... I've not touched either, and have no
problems with digital modes.   I also use a USB soundcard to keep
computer sounds separate.

In DATA A, the MIC button functions are disabled.    And Fred Cady, KE7Z
(SK) in his KX3 book makes no mention of having to do anything with the
bias.

As far as the speaker, I would rather not have to listen to the
cacophony of tones using WSJT-X modes, but if you need to hear it, you
can usually run the a USB soundcard's line-in through your computer
speaker or headphone jack.

Neil, KN3ILZ

On 6/9/2019 11:25 PM, Nr4c wrote:
Yes, but you still must turn OFF bias and BTNS.

This arrangement works very well. I like to put a spitter in the phones jack 
with one end to computer the other for ear buds so I can monitor the radio 
audio. Elecraft still hasn’t added a feature to have phones plus speaker as in 
the K-Line.

Sent from my iPhone
...nr4c. bill


On Jun 9, 2019, at 8:24 AM, Neil Zampella <[email protected]> wrote:

FWIW... you don't need a signalink to connect the KX3 for digital modes.

All you need is the KXUSB cable for CAT control (& PTT), and 3.5 cables
for the MIC and PHONO jackts to the Line out/speakers and line in on the
computer.

Very simple, and no having to worry about switching about jumpers or
adding capacitors.

Neil, KN3ILZ

On 6/8/2019 1:47 PM, Terry Basom wrote:
The SLMODKX3 jumper module for using the Signalink USB with a KX3 or KX2,
has a DC blocking capacitor built in.

Can anyone tell me where it is in the circuit and a value? It eliminates
turning off the mike bias in the menu when using the Signalink USB. I am
just using jumpers and would like to put in the capacitor to eliminate
having to turn off mike bias and having to remember to turn it back on.

---
This email has been checked for viruses by AVG.
https://www.avg.com

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected] 

Reply via email to