OK, I have a K2/100 w/ KAT100 that may have recently suffered from a static discharge event. I had to replace D16 & D17 in the KPA100, and I’m likely to do the same to the SWR bridge diodes in the KAT100 (since I can’t get the bridge to null properly).
The other thing I noticed is that the receiver sensitivity is substantially lower when using the CW filter. Using OP1, it seems to receive normally. I have three filters for CW 1.0, 0.4 and 0.16. When switching to 1.0 from OP1, signal levels drop by about 2-3 bars on the S-meter. Anything in particular I should troubleshoot? Bill Coleman, AA4LR, PP-ASEL Mail: [email protected] Web: http://boringhamradiopart.blogspot.com Quote: "Not within a thousand years will man ever fly!" -- Wilbur Wright, 1901 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
