I just got one, and it happens to fit my camera tripod. The tripod attaches
to a camera using a smaller plastic piece that screws onto the camera (or
the antenna) and snaps onto the platform. There’s just enough clearance for
the BNC connector.
You might try something like a flash holder to get enough clearance.
I used it Sunday morning FD with my QRP K2. It was quieter than the wire
in a tree, but pretty much everyone who could hear me with one could also
hear me with the other. Really nice!
Peter W0LLN
OMon, Jun 24, 2019 at 12:32 AM Wayne Burdick <[email protected]> wrote:
> Phil,
>
> I'll send you a dimensioned drawing.
>
> 73,
> Wayne
> N6KR
>
>
> > On Jun 23, 2019, at 6:42 PM, Phil Hystad via Elecraft <
> [email protected]> wrote:
> >
> > I just ordered the AX-1 antenna Tripod Adapter but I am wondering if it
> fits the camera tripod that we have. I need about two inches of clearance
> (i.e. radius from center of attachment screw) to clear the platform
> designed for the camera. I am not sure that the AX-1 tripod adapter has
> that amount of distance between the BNC connector and the mounting screw.
> >
> > Has anyone used this tripod adapter on a camera mount tripod? Or, do
> I need to buy another tripod and if so, any suggestions?
> >
> > 73, phil, K7PEH
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[email protected]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [email protected]
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
