FOR SALE: HF Projects Packer Amp V4, 5 watts in, 35 watts out. Very nice. $150 shipped. Off list Paul Webb
Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10 ________________________________ From: [email protected] <[email protected]> on behalf of [email protected] <[email protected]> Sent: Monday, July 1, 2019 6:18:08 AM To: [email protected] Subject: Elecraft Digest, Vol 183, Issue 1 Send Elecraft mailing list submissions to [email protected] To subscribe or unsubscribe via the World Wide Web, visit http://mailman.qth.net/mailman/listinfo/elecraft or, via email, send a message with subject or body 'help' to [email protected] You can reach the person managing the list at [email protected] When replying, please edit your Subject line so it is more specific than "Re: Contents of Elecraft digest..." Today's Topics: 1. Re: KX3 wattage (Don Wilhelm) 2. Re: KX3 wattage ([email protected]) 3. Re: Cable for FSK-D ([email protected]) 4. Re: Cable for FSK-D (Jack Brindle) 5. Elecraft CW Net Announcement (kevinr) 6. KPA1500 PSU LED board replacement? (eric norris) 7. T1 ATU for 200mW WSPRlite (MaverickNH) 8. Re: T1 ATU for 200mW WSPRlite (Bill Adams) 9. KX3/PX3/KXPA100 For Sale (John Belstner) 10. FS: Elecraft K3/P3 (Grant Youngman) 11. K2: "Pop" when switching certain bands (Jim KO5V) 12. Fw: K2: "Pop" when switching certain bands (Jim KO5V) 13. Fw: K2: "Pop" when switching certain bands (Jim KO5V) 14. Re: T1 ATU for 200mW WSPRlite (MaverickNH) 15. Re: KPA1500 PSU LED board replacement? (Ken K6MR) 16. K3 data mode fail (Skip Cameron) 17. Re: K3 data mode fail (Jim Brown) 18. Elecraft CW Net Report (kevinr) 19. Elecraft KX4 (Sergey Zimin) 20. Fusing power cable on K3 (David Wilcox) 21. Re: Elecraft KX4 (Nr4c) 22. Re: Fusing power cable on K3 (Roy Koeppe) 23. Remote rig System RRC 1258 MK II Set (Howard Sherer) 24. Help me! Kpa100 broked during lightning (Juha - oh6os) 25. Re: Elecraft KX4 (Sergey Zimin) 26. Re: Help me! Kpa100 broked during lightning (Dave) 27. Re: K3 data mode fail ([email protected]) 28. Re: Help me! Kpa100 broked during lightning (Don Wilhelm) ---------------------------------------------------------------------- Message: 1 Date: Sat, 29 Jun 2019 16:19:19 -0400 From: Don Wilhelm <[email protected]> To: JP Douglas <[email protected]>, [email protected] Subject: Re: [Elecraft] KX3 wattage Message-ID: <[email protected]> Content-Type: text/plain; charset=utf-8; format=flowed That gentleman is mistaken unless something happened while I was not watching, the KX3 does up to 15 watts. 73, Don W3FPR On 6/29/2019 4:04 PM, JP Douglas wrote: > Hi all! > > While having a QSO yesterday from my mobile to a QRP station on 20 meters, > the gentleman I was chatting with mentioned that the KX3 now does up to 20 > watts of power. Never heard this before and wondering if it's true, currently > my KX3 does up to 15 watts. I use my KX3 mostly for digital modes; winlink > and fldigi but do try voice w/it once in a while. ------------------------------ Message: 2 Date: Sat, 29 Jun 2019 17:12:27 -0400 From: <[email protected]> To: "'Wayne Burdick'" <[email protected]>, "'JP Douglas'" <[email protected]> Cc: 'Elecraft Reflector' <[email protected]> Subject: Re: [Elecraft] KX3 wattage Message-ID: <[email protected]> Content-Type: text/plain; charset="us-ascii" If I use a large power supply and turn the KX3 on its side and shake it - I still only get 15 watts according to my Tird meter (Trusty ole Bird). Hank -----Original Message----- From: [email protected] <[email protected]> On Behalf Of Wayne Burdick Sent: Saturday, June 29, 2019 4:15 PM To: JP Douglas <[email protected]> Cc: Elecraft Reflector <[email protected]> Subject: Re: [Elecraft] KX3 wattage Not. Wayne > On Jun 29, 2019, at 1:04 PM, JP Douglas <[email protected]> wrote: > > Hi all! > > While having a QSO yesterday from my mobile to a QRP station on 20 meters, the gentleman I was chatting with mentioned that the KX3 now does up to 20 watts of power. Never heard this before and wondering if it's true, currently my KX3 does up to 15 watts. I use my KX3 mostly for digital modes; winlink and fldigi but do try voice w/it once in a while. > > Thanks and 73 de Jose Douglas KB1TCD, Midcoast ME ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ------------------------------ Message: 3 Date: Sat, 29 Jun 2019 16:41:38 -0500 From: [email protected] To: [email protected] Subject: Re: [Elecraft] Cable for FSK-D Message-ID: <[email protected]> Content-Type: text/plain; charset=utf-8; format=flowed; DelSp=Yes I use a MicroHAM DigiKeyerII with a premade cable for my K3S on FSK RTTY. http://microham-usa.com/store/product-info.php?pid2.html It is close to plug and play and it has worked well for me. John KK9A - W4AAA Kevin, N4TT wrote: I'd like to use FSK-D. I've read over the options and would like to use a USB to ACC cable. The ACC socket on the K3s is being used by the KPA/KAT combo. Is there an off-the-shelf kit of cables/interrupters I can get that would be plug-n-play for FSK-D on a K3s + KAT + KPA? 73, Kev N4TT ------------------------------ Message: 4 Date: Sat, 29 Jun 2019 15:54:47 -0700 From: Jack Brindle <[email protected]> To: "Kevin, N4TT" <[email protected]> Cc: Elecraft Reflector Reflector <[email protected]> Subject: Re: [Elecraft] Cable for FSK-D Message-ID: <[email protected]> Content-Type: text/plain; charset=utf-8 A Mortty will do a great job of conveying the ASCII data stream to Baudot, generating the FSK data you need. Then, take a look at N6TV?s Y-Box for an easy way to connect the data into the Aux IO connections. The Mortty is $18, available at: http://hamprojects.info/mortty/ <http://hamprojects.info/mortty/> Go to: https://www.kkn.net/~n6tv/Y-BOX/ <https://www.kkn.net/~n6tv/Y-BOX/> for info on the Y-Box 73! Jack, W6FB > On Jun 29, 2019, at 11:28 AM, Kevin, N4TT <[email protected]> wrote: > > I'd like to use FSK-D. I've read over the options and would like to use a > USB to ACC cable. The ACC socket on the K3s is being used by the KPA/KAT > combo. > > Is there an off-the-shelf kit of cables/interrupters I can get that would > be plug-n-play for FSK-D on a K3s + KAT + KPA? > > 73, > Kev N4TT > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ------------------------------ Message: 5 Date: Sat, 29 Jun 2019 20:02:41 -0700 From: kevinr <[email protected]> To: [email protected] Subject: [Elecraft] Elecraft CW Net Announcement Message-ID: <[email protected]> Content-Type: text/plain; charset=utf-8; format=flowed Good Evening, ?? The annual Field Day hiatus has passed.? It has been cool and wet.? But, then, it is not yet officially summer in Oregon.? For that you have to wait until after July 4th.? However, the loggers have been very active.? They're clearing the other side of the top of this mountain.? Each morning they are a little closer.? Luckily they don't get noisy until just before dawn.? The cool weather lets them work longer each day so they will be done sooner.? Then I can sleep again. ?? The sun did have a couple tiny sunspots this week.? Broke the streak of 30+ spotless days.? We are between solar wind streams so the background noise should be less; at least from the space side of things.? Summer thunderstorms are even funneling down the Columbia River valley.? That reminds me I need to reattach my antennas.? Lightning strikes so rarely here that I unscrew them once a year or less. Please join us on: 14050 kHz at 2200z Sunday (3 PM PDT Sunday) ?7047 kHz at 0000z Monday (5 PM PDT Sunday) 73, Kevin. KD5ONS Let a man walk alone, with few wishes, like an elephant in the forest. - ------------------------------ Message: 6 Date: Sun, 30 Jun 2019 06:04:59 +0000 (UTC) From: eric norris <[email protected]> To: Elecraft Reflector <[email protected]> Subject: [Elecraft] KPA1500 PSU LED board replacement? Message-ID: <[email protected]> Content-Type: text/plain; charset=UTF-8 Does anyone have the instructions for this, or is it obvious? Thanks 73 Eric WD6DBM Sent from Yahoo Mail on Android ------------------------------ Message: 7 Date: Sun, 30 Jun 2019 05:46:23 -0700 (MST) From: MaverickNH <[email protected]> To: [email protected] Subject: [Elecraft] T1 ATU for 200mW WSPRlite Message-ID: <[email protected]> Content-Type: text/plain; charset=us-ascii I'm planning to do some camping and will bring along a KX3Helper EndFed 40-6m antenna with 9:1 Unan, T1 ATU and SOTAbeams WSPRlite to run on 30m from a USB battery bank. The T1 requires 0.5W to tune but the WSPRlite output is 0.2W. Any thoughts on options other than tuning up with another radio (like KX2 w/o ATU)? BRET/N4SRN -- Sent from: http://elecraft.365791.n2.nabble.com/ ------------------------------ Message: 8 Date: Sun, 30 Jun 2019 10:41:48 -0500 From: Bill Adams <[email protected]> To: MaverickNH <[email protected]>, "[email protected]" <[email protected]> Subject: Re: [Elecraft] T1 ATU for 200mW WSPRlite Message-ID: <[email protected]> Content-Type: text/plain; charset="utf-8" Bret I assume from your gear list that the 30 meter WSPRlite is the only transmitter. In that case, a resonant 30 meter antenna either a center fed dipole, a ? wave vertical with radials or an end fed ? wavelength wire with a L match should satisfy the antenna requirement. Bill AF4B Sent from Mail for Windows 10 From: MaverickNH Sent: Sunday, June 30, 2019 7:47 AM To: [email protected] Subject: [Elecraft] T1 ATU for 200mW WSPRlite I'm planning to do some camping and will bring along a KX3Helper EndFed 40-6m antenna with 9:1 Unan, T1 ATU and SOTAbeams WSPRlite to run on 30m from a USB battery bank. The T1 requires 0.5W to tune but the WSPRlite output is 0.2W. Any thoughts on options other than tuning up with another radio (like KX2 w/o ATU)? BRET/N4SRN -- Sent from: http://elecraft.365791.n2.nabble.com/ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ------------------------------ Message: 9 Date: Sun, 30 Jun 2019 12:31:34 -0700 From: John Belstner <[email protected]> To: [email protected] Subject: [Elecraft] KX3/PX3/KXPA100 For Sale Message-ID: <CAJM3DS3fJm1xyRR-knHvoCgKJgqtf0qYNBncXfWeaqExo=a...@mail.gmail.com> Content-Type: text/plain; charset="UTF-8" I have the following for sale... KX3 - #1410 (with 2M module) PX3 - #2651 KXPA100 - #1093 SignaLink USB A pair of 9.8 Ah Super polymer Lithium-ion Battery Packs (new) A pair of SeaHorse (Pelican "like") cases All cables and manuals My plans to operate portable never happened. Equipment was only ever used in the shack. Please contact me *off list *if interested and I can send pictures. 73, John W9EN ------------------------------ Message: 10 Date: Sun, 30 Jun 2019 16:10:38 -0400 From: Grant Youngman <[email protected]> To: eric norris via Elecraft <[email protected]> Subject: [Elecraft] FS: Elecraft K3/P3 Message-ID: <[email protected]> Content-Type: text/plain; charset=us-ascii Since I currently have no reasonable solutions for fixed station operation and am primarily KX3-portable, I have reluctantly decided to part with my K3 and P3 The K3 is fully featured and updated. The P3 has both SVGA and TXMON options installed. The K3 was back at Elecraft in October 2018 for a health check and it is operating fully to specifications. Both units are in as-new physical condition (well, there might be some dust). The specifics of the radio, options, updates, etc. can be found here: https://drive.google.com/file/d/1lOUwAigCL3lXVDASYb9i5BkKFWGFKDsw/view?usp=sharing Photos are here: https://flic.kr/s/aHsmEE9gX4 I am asking $4300 including shipping (UPS, CONUS) in Elecraft shipping cartons. Please respond off-list with questions, interest, etc. Thanks .. Grant NQ5T K3 #2091 KX3 #8342 ------------------------------ Message: 11 Date: Sun, 30 Jun 2019 14:55:08 -0600 (GMT-06:00) From: Jim KO5V <[email protected]> To: Elecraft List <[email protected]> Subject: [Elecraft] K2: "Pop" when switching certain bands Message-ID: <[email protected]> Content-Type: text/plain; charset=UTF-8 Good Afternoon, Today I noticed a "pop" on the audio of my K2 when I changed in and out 15M, so I checked the switching on all bands: When changing from 15M to 12M or 17M it is fairly loud. Changing from 12M or 17M to 15M causes a fainter "pop". A much more attenuated "pop" happens when changing from 14M to 10M, and also from 10M back to 14m. Also, on 15M, when changing from VFO B to VFO A I hear a loud "pop", but it does not happen going from A to B. The fainter "pops" might have always been there, but the ones on 15M are loud enough to cause the clip light on my DSP to turn red. I wonder if it has something to do with diodes across relays, or the relays themselves. Any more ideas? Thanks in advance. 73, Jim KO5V ------------------------------ Message: 12 Date: Sun, 30 Jun 2019 14:59:48 -0600 (GMT-06:00) From: Jim KO5V <[email protected]> To: Elecraft List <[email protected]> Subject: [Elecraft] Fw: K2: "Pop" when switching certain bands Message-ID: <[email protected]> Content-Type: text/plain; charset=UTF-8 I forgot to mention that the K2 is connected to my KPA100, so I'll recheck it without the amp. 73, Jim KO5V -----Forwarded Message----- >From: Jim KO5V <[email protected]> >Sent: Jun 30, 2019 2:55 PM >To: Elecraft List <[email protected]> >Subject: K2: "Pop" when switching certain bands > >Good Afternoon, > >Today I noticed a "pop" on the audio of my K2 when I changed in and out 15M, >so I checked the switching on all bands: > >When changing from 15M to 12M or 17M it is fairly loud. Changing from 12M or >17M to 15M causes a fainter "pop". A much more attenuated "pop" happens when >changing from 14M to 10M, and also from 10M back to 14m. > >Also, on 15M, when changing from VFO B to VFO A I hear a loud "pop", but it >does not happen going from A to B. > >The fainter "pops" might have always been there, but the ones on 15M are loud >enough to cause the clip light on my DSP to turn red. > >I wonder if it has something to do with diodes across relays, or the relays >themselves. > >Any more ideas? Thanks in advance. > >73, Jim KO5V > ------------------------------ Message: 13 Date: Sun, 30 Jun 2019 15:05:21 -0600 (GMT-06:00) From: Jim KO5V <[email protected]> To: Elecraft List <[email protected]> Subject: [Elecraft] Fw: K2: "Pop" when switching certain bands Message-ID: <[email protected]> Content-Type: text/plain; charset=UTF-8 OK, it's the base K2, and the loudest "pop" happens when switching from VFO B to VFO A on 15M. Sorry, I should have waited 5 minutes before sending the last email... Thanks. Jim -----Forwarded Message----- >From: Jim KO5V <[email protected]> >Sent: Jun 30, 2019 2:59 PM >To: Elecraft List <[email protected]> >Subject: Fw: K2: "Pop" when switching certain bands > >I forgot to mention that the K2 is connected to my KPA100, so I'll recheck it >without the amp. > >73, Jim KO5V > >-----Forwarded Message----- >>From: Jim KO5V <[email protected]> >>Sent: Jun 30, 2019 2:55 PM >>To: Elecraft List <[email protected]> >>Subject: K2: "Pop" when switching certain bands >> >>Good Afternoon, >> >>Today I noticed a "pop" on the audio of my K2 when I changed in and out 15M, >>so I checked the switching on all bands: >> >>When changing from 15M to 12M or 17M it is fairly loud. Changing from 12M or >>17M to 15M causes a fainter "pop". A much more attenuated "pop" happens when >>changing from 14M to 10M, and also from 10M back to 14m. >> >>Also, on 15M, when changing from VFO B to VFO A I hear a loud "pop", but it >>does not happen going from A to B. >> >>The fainter "pops" might have always been there, but the ones on 15M are loud >>enough to cause the clip light on my DSP to turn red. >> >>I wonder if it has something to do with diodes across relays, or the relays >>themselves. >> >>Any more ideas? Thanks in advance. >> >>73, Jim KO5V >> ------------------------------ Message: 14 Date: Sun, 30 Jun 2019 14:55:37 -0700 (MST) From: MaverickNH <[email protected]> To: [email protected] Subject: Re: [Elecraft] T1 ATU for 200mW WSPRlite Message-ID: <[email protected]> Content-Type: text/plain; charset=us-ascii Thanks Bill, but I wasn't clear the options I was looking for were how to use he T1 with the EndFed antenna I have with the WSPRlite, given that the T1 requires 0.5W and the WSPRlite outputs only 0.2W. Odd as it sounds, I'm looking for an "amplifier" to switch in to bump 10-25 fold to 2-5W as the T1 likes 2-5W for initial tune cycle and 0.5W thereafter. The T1 has latching relays so it seems I *could* tune with a KX2 and then swap in the WSPRlite - so that's the backup plan. BRET/N4SRN -- Sent from: http://elecraft.365791.n2.nabble.com/ ------------------------------ Message: 15 Date: Sun, 30 Jun 2019 22:34:46 +0000 From: Ken K6MR <[email protected]> To: "[email protected]" <[email protected]>, Elecraft Reflector <[email protected]> Subject: Re: [Elecraft] KPA1500 PSU LED board replacement? Message-ID: <byapr07mb621459559849cf1d48b59f169e...@byapr07mb6214.namprd07.prod.outlook.com> Content-Type: text/plain; charset="Windows-1252" I pulled mine out a while back to understand the fan circuit and it?s pretty obvious. Just make a diagram of the connectors so you don?t accidentally swap one. Ken K6MR ________________________________ From: [email protected] <[email protected]> on behalf of eric norris via Elecraft <[email protected]> Sent: Saturday, June 29, 2019 11:04:59 PM To: Elecraft Reflector Subject: [Elecraft] KPA1500 PSU LED board replacement? Does anyone have the instructions for this, or is it obvious? Thanks 73 Eric WD6DBM Sent from Yahoo Mail on Android ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ------------------------------ Message: 16 Date: Sun, 30 Jun 2019 22:43:09 -0500 From: Skip Cameron <[email protected]> To: [email protected] Subject: [Elecraft] K3 data mode fail Message-ID: <CAH=yjo4bqnkqqu3hfumjepolc_k8e+tj6yvo8orjv6tbtwg...@mail.gmail.com> Content-Type: text/plain; charset="UTF-8" While using my K3 in data A mode with wsjt-x software on 6M, TX stopped, and other data modes also have no TX output. RX remains OK, and CW and SSB TX & RX still work OK. Need suggestions on diagnosis or reset process. Direct replies off list are OK. Thanks, Skip W5GAI ------------------------------ Message: 17 Date: Sun, 30 Jun 2019 21:03:18 -0700 From: Jim Brown <[email protected]> To: [email protected] Subject: Re: [Elecraft] K3 data mode fail Message-ID: <[email protected]> Content-Type: text/plain; charset=utf-8; format=flowed On 6/30/2019 8:43 PM, Skip Cameron wrote: > Need suggestions on diagnosis or reset process. VOX settings?? Level changes?? Windoze updates screwing with sound card settings or choices? 73, Jim K9YC ------------------------------ Message: 18 Date: Sun, 30 Jun 2019 21:19:31 -0700 From: kevinr <[email protected]> To: [email protected] Subject: [Elecraft] Elecraft CW Net Report Message-ID: <[email protected]> Content-Type: text/plain; charset=utf-8; format=flowed Good Evening, ?? Conditions were poor.? QSB was deep.? But the thunderstorm noise was not too bad.? I remember the bottom of the last cycle seemed interminable, this one compares to it.? At least the upward path is steeper than the backside.? Now to start seeing improvement. ?? The folks out east both reported high humidity and high temperatures.? I don't miss summer in either the Midwest or the the South; plus, here in the PNW, my allergies don't match the pollen.? East of the Rockies I cry and sneeze a lot :)? I do miss January in Wisconsin when the air is clear and brisk - snow falling out of a sunny sky. ? On 14050.5 kHz at 2200z: K6XK - Roy - IA K4JPN - Steve - GA ? On 7047.5 kHz at 0000z: K6PJV - Dale - CA W6JHB - Jim - CA K0DTJ - Brian - CA ?? Maybe one of those solar streams will enhance the ionosphere. Or we could keep waiting for sunspots. Until next week stay well and 73, ?? Kevin.? KD5ONS - ------------------------------ Message: 19 Date: Mon, 1 Jul 2019 07:30:37 +0300 From: Sergey Zimin <[email protected]> To: [email protected] Subject: [Elecraft] Elecraft KX4 Message-ID: <[email protected]> Content-Type: text/plain; charset=utf-8; format=flowed It is interesting to know: will Elecraft issue a mobile version - KX4? 73! Sergey RM6AA. ------------------------------ Message: 20 Date: Mon, 1 Jul 2019 04:45:27 -0400 From: David Wilcox <[email protected]> To: [email protected] Subject: [Elecraft] Fusing power cable on K3 Message-ID: <[email protected]> Content-Type: text/plain; charset=utf-8 I recently purchased a used K3 and am building a short power cord (after the discussion of voltage drop from longer cables). I noticed that the power cable that came with my IC7000 has fuses in both leads. Since the K3 has a built in fuse it is still a good idea to put fuses in both sides of the new power cable? It will be only used in the shack, not mobile. Dave K8WPE David J. Wilcox K8WPE?s iPad ------------------------------ Message: 21 Date: Mon, 1 Jul 2019 06:16:46 -0400 From: Nr4c <[email protected]> To: Sergey Zimin <[email protected]> Cc: [email protected] Subject: Re: [Elecraft] Elecraft KX4 Message-ID: <[email protected]> Content-Type: text/plain; charset=utf-8 Not mentioned so far. BTW: What is a ?mobile? version? They?ve so fa not done this for any other radio. Sent from my iPhone ...nr4c. bill > On Jul 1, 2019, at 12:30 AM, Sergey Zimin <[email protected]> wrote: > > It is interesting to know: will Elecraft issue a mobile version - KX4? > > 73! Sergey RM6AA. > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ------------------------------ Message: 22 Date: Mon, 1 Jul 2019 05:19:46 -0500 From: "Roy Koeppe" <[email protected]> To: <[email protected]> Subject: Re: [Elecraft] Fusing power cable on K3 Message-ID: <7A0E959FE1B84602B62B4460C10A0118@ROYKOEPPEHP> Content-Type: text/plain; format=flowed; charset="UTF-8"; reply-type=original No, fuses have voltage drop both in their elements and contacts. Just what you're trying to defeat and avoid. 73, Roy K6XK I recently purchased a used K3 and am building a short power cord (after the discussion of voltage drop from longer cables). I noticed that the power cable that came with my IC7000 has fuses in both leads. Since the K3 has a built in fuse it is still a good idea to put fuses in both sides of the new power cable? It will be only used in the shack, not mobile. Dave K8WPE ------------------------------ Message: 23 Date: Mon, 1 Jul 2019 06:28:55 -0400 From: Howard Sherer <[email protected]> To: elecraft <[email protected]> Subject: [Elecraft] Remote rig System RRC 1258 MK II Set Message-ID: <cafmq1msqc+-r-ukxggcyxunqaq52msm7fkee9a-infwxmnm...@mail.gmail.com> Content-Type: text/plain; charset="UTF-8" *Remote rig System RRC 1258 MK II Set*Remote Rig interface system RRC 1258 MK II. This is the complete set of both the local and remote interface box system that can be used to operate remote control of many different radios. My set is supplied with all of the necessary cables to install with an Elecraft K3 or K3s but can be used with many different radios. This system works great to remote into your own system with no computer required, or access the stations on Remote Ham Radio, or Remote Hams.Perfect condition $500. Howard Sherer AE3T ------------------------------ Message: 24 Date: Mon, 1 Jul 2019 03:30:36 -0700 (MST) From: Juha - oh6os <[email protected]> To: [email protected] Subject: [Elecraft] Help me! Kpa100 broked during lightning Message-ID: <[email protected]> Content-Type: text/plain; charset=us-ascii Hello, Yes, all cables was connected during the first lightning bolt nearby. Now K2/10W is ok! All work fine, luckily. But with KPA100: 1) Metering (K2 LED paragraph) do not show anything. 2) I get 10W and 100W output, but can't adjustable power. 3) KPA100 don't talk with computer, yes computers COM port is broken too. But I tested with another working COM and the same situation; don't work. 4) Pressing TUNE K2 show "0.1 9.9-1" (10W) and 1 1.0-1 (100W). I replaced D16 and D17 on KPA100. Nothing changed. juha oh6os What next -- Sent from: http://elecraft.365791.n2.nabble.com/ ------------------------------ Message: 25 Date: Mon, 1 Jul 2019 14:09:03 +0300 From: Sergey Zimin <[email protected]> To: Nr4c <[email protected]> Cc: [email protected] Subject: Re: [Elecraft] Elecraft KX4 Message-ID: <CABU6eFXeEo57gCF0TUfgU=+s-skwkhzg83wwhbhfxt-eys7...@mail.gmail.com> Content-Type: text/plain; charset="UTF-8" I meant the 5-watt version of the k4 with a panadapter in a single package the size of which is like kx3... ??, 1 ???. 2019 ?., 13:16 Nr4c <[email protected]>: > Not mentioned so far. > > BTW: What is a ?mobile? version? They?ve so fa not done this for any > other radio. > > > > Sent from my iPhone > ...nr4c. bill > > > > On Jul 1, 2019, at 12:30 AM, Sergey Zimin <[email protected]> wrote: > > > > It is interesting to know: will Elecraft issue a mobile version - KX4? > > > > 73! Sergey RM6AA. > > > > ______________________________________________________________ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:[email protected] > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > Message delivered to [email protected] > > ------------------------------ Message: 26 Date: Mon, 1 Jul 2019 07:09:44 -0400 From: Dave <[email protected]> To: Juha - oh6os <[email protected]> Cc: [email protected] Subject: Re: [Elecraft] Help me! Kpa100 broked during lightning Message-ID: <[email protected]> Content-Type: text/plain; charset=utf-8 Sounds like the RS-232 chip in the amp may be fried, especially if the PC com port it was connected to fried. I?ve seen this in the public safety world. Lightning hit our phone lines coming into a PC at the site and took out every com port (multi port). Also com port on all equipment attached got zapped. Not sure what else. I do not own the KPA100 so cannot add anything else. Dave wo2x Sent from my waxed string and tin cans. > On Jul 1, 2019, at 6:30 AM, Juha - oh6os <[email protected]> wrote: > > Hello, > > Yes, all cables was connected during the first lightning bolt nearby. > > Now K2/10W is ok! All work fine, luckily. > > But with KPA100: > > 1) Metering (K2 LED paragraph) do not show anything. > 2) I get 10W and 100W output, but can't adjustable power. > 3) KPA100 don't talk with computer, yes computers COM port is broken too. > But I tested with another working COM and the same situation; don't work. > 4) Pressing TUNE K2 show "0.1 9.9-1" (10W) and 1 1.0-1 (100W). > > I replaced D16 and D17 on KPA100. Nothing changed. > > juha oh6os > > What next > > > > -- > Sent from: http://elecraft.365791.n2.nabble.com/ > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ------------------------------ Message: 27 Date: Mon, 1 Jul 2019 11:14:56 +0000 From: <[email protected]> To: [email protected] Cc: [email protected] Subject: Re: [Elecraft] K3 data mode fail Message-ID: <[email protected]> Content-Type: text/plain; charset=us-ascii Skip, Check your soundcard cable to your Line-in jack. I had the same problem occur several times before I discovered the problem was the cable. I pressed on it at the line in jack while testing and the power out came back up. Same symptoms: no output, RX signals OK, CW and SSB OK. Replaced the cable and everything FB now. 73 de Ed ____________________________________________________________ Sad News For Meghan Markle And Prince Harry track.volutrk.com http://thirdpartyoffers.juno.com/TGL3141/5d19eb71cd8946b712651st03vuc ------------------------------ Message: 28 Date: Mon, 1 Jul 2019 07:17:56 -0400 From: Don Wilhelm <[email protected]> To: Juha - oh6os <[email protected]>, [email protected] Subject: Re: [Elecraft] Help me! Kpa100 broked during lightning Message-ID: <[email protected]> Content-Type: text/plain; charset=utf-8; format=flowed Juha, Whenever I had a lightning hit KPA100 to repair, I always replaced all the active devices (including all diodes) in the KPA100. Even if the devices are not currently failing, there is a good chance that they have been stressed and will fail later. If you are using a USB to serial adapter, that was likely damaged too. 73, Don W3FPR On 7/1/2019 6:30 AM, Juha - oh6os wrote: > Hello, > > Yes, all cables was connected during the first lightning bolt nearby. > > Now K2/10W is ok! All work fine, luckily. > > But with KPA100: > > 1) Metering (K2 LED paragraph) do not show anything. > 2) I get 10W and 100W output, but can't adjustable power. > 3) KPA100 don't talk with computer, yes computers COM port is broken too. > But I tested with another working COM and the same situation; don't work. > 4) Pressing TUNE K2 show "0.1 9.9-1" (10W) and 1 1.0-1 (100W). > > I replaced D16 and D17 on KPA100. Nothing changed. > > juha oh6os > ------------------------------ _______________________________________________ Elecraft mailing list Post to: [email protected] http://mailman.qth.net/mailman/listinfo/elecraft You must be a subscriber to post. Elecraft web page: http://www.elecraft.com End of Elecraft Digest, Vol 183, Issue 1 **************************************** ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
