Lloyd,
Elecraft does still have some band kits for the 2 band board. Order the
kit for the band you wish to switch to.
There are no new 2 band boards available from Elecraft.
Yes, if you can find another 2 band board, you can change the band
boards easily. The K1 will remember the OPF offsets for up to 6 bands.
You only need to change the board and set the "b1" and "b2" menu
parameters to match the bands of the boards in use.
73,
Don W3FPR
On 7/1/2019 9:25 AM, LL wrote:
I'm acquiring a K1 with ATU, 30 and 40. Really would love to have 20 and 80.
If nothing else, I might be interested in seeing if it's possible to rework
the existing board for 20, instead of 30.
Is it possible to have four bands on two boards - that is, not on a
four-band board?
might it be possible to swap them out to switch bands, if needed, and only
two-band boards are available?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
