Hi These are the Transverters I use.
Very good quality and they can be 10mhz gps locked. http://www.q5signal.com/ Mike va3mw Sent from my iPad > On Jul 5, 2019, at 7:16 AM, Conrad PA5Y <g0...@g0ruz.com> wrote: > > Neither! > > > I would buy a good transverter to use with a K3S. Two obvious choices. > > > https://shop.kuhne-electronic.com/kuhne/en/shop/converter-transverte/transverter/TR+144++PRO++Transverter/?card=1621 > > TR 144 - PRO, Transverter - Kuhne Electronic Amateur Radio > Shop<https://shop.kuhne-electronic.com/kuhne/en/shop/converter-transverte/transverter/TR+144++PRO++Transverter/?card=1621> > shop.kuhne-electronic.com > Endkundenshop main_nav Produkte Meta-Description > > > > http://www.ha1ya.hu/htmkepek/me2t_pro3_spec.htm > > ME2T-PRO3 & ME2HT-PRO3 transverter > specifications<http://www.ha1ya.hu/htmkepek/me2t_pro3_spec.htm> > www.ha1ya.hu > • Frequency Coverage: 144.0-146.0MHz band. • IF in/out Frequency : > 28.0-30.0MHz, or 14.0-16.0MHz • LO frq stability: Low phase noise, 1ppm PDI > or optional 0.5ppm AXTAL TCXO's! • I/O Impedance : 50 Ohm unbalanced • Input > Voltage : 13.8VDC, +-5%, polarity mismatch, 10A -40dB EMI filter. • Power > Consumption : 0.55A on RX, 5.5A on TX @30W out version, 10.5A @50W version. > Both of these transverters will outperform the Elecraft transverter with > respect to TX PN, IMD and RX IMD. They are both excellent, the HA1YA is > considerably cheaper and that is what I chose, actually in my case the ME2T > XP because I need 2 channels for Xpol EME. I have extensively tested all > these combinations. > > > The IC9700 is nice and convenient and quite reasonable but both the TX and RX > performance is inferior to the K3S with either of the above transverters. > > > 73 > > > Conrad PA5Y > > > > > ________________________________ > From: elecraft-boun...@mailman.qth.net <elecraft-boun...@mailman.qth.net> on > behalf of Kjeld Holm <k...@kh-translation.dk> > Sent: 04 July 2019 20:31 > To: Elecraft Reflector > Subject: [Elecraft] Digital modes on 144MHz only > > Digital modes on 144MHz only > > I plan for a second station to use for digital modes on 144MHz only. If you > look at performance only (no price, no ergonomics, no use outside digital > modes on 144MHz) what would you prefer > > 1) K3/K3S with internal transverter > 2) IC-9700 > > In both cases I plan to use a 1kW amplifier. > > Vy 73 de OZ1CCM, Kjeld > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to g0...@g0ruz.com > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to va...@portcredit.net ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com