MIC 4 seems a little low but the fact you are eventually getting some ALC when you crank it up tells me that either WJST-X audio (labeled as Pwr) on the right of the main screen or the Windows 10 audio (control panel -> sound -> USB Audio CODEC Speakers (if using internal K3s sound card) is set too low. Check each of these.
For reference, after some help here on the reflector, my setting s are MIC=30, WSJT-X Pwr = -17.6 dB, Sound Playback = -17.8 dB. The numbers work for me but you may have to adjust to get the 4+flash ALC. 73, Kev N4TT On Sat, Jul 6, 2019 at 2:05 PM Mike VE3YF <[email protected]> wrote: > Hi Joe: > > Thanks for the info, that solved the problem of switching out of Data A > Mode into Voice, that part is working great. I have verified that I am > in Data A mode, and CMP control reads 0, Mic is reading Line 4, however > when I press the Tune button on WSJT-X the rig keys up, but no power > output. The rig's pwr is set for 27 watts, but no output on my external > Power Meter and if I change the Mic Control to Line 60 from Line 4 I get > power output but only to 3 bars max on the K3S ALC Meter and 27 watts on > the external meter. > > FWIW, I am using WSJT-X Soundcard Input - Line (microHAM CODEC) , and > Soundcard Output - Headset Earphone (microHAM CODEC) and both are set to > Left. > > And in Windows I am using Headset Earphone (microHAM CODEC) in the > Playback Panel, (Speakers is the Default device), and Line (microHAM > CODEC) in the Recording Panel as Default. Both Levels are set to 75 > > -- > > *73 De Mike* > *VE3YF > > _/http://www.ve3yf.com/_* > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
