Lloyd,
The kit for built K1s included the LCD p/n E600015, for unbuilt K1s it
was not included.
In order to install the backlight the LCD must be removed and will most
likely be destroyed in the process. The easiest way to remove it is to
cut the pins close to the LCD body and then remove them one at a time.
Before doing anything, check with the Elecraft sales office to be
certain both the p/n E600015 and the backlight kit for an unbuilt K1 are
available.
73,
Don W3FPR
On 7/6/2019 4:34 PM, LL wrote:
The backlight mod on the Elecraft site says that it's for unbuilt kits. Can
it be added to a built kit? If not, is there a mod for that, somewhere...?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
