Jim - I'm not sure this will help but here goes....
I have KX2 SN 11xx with current firmware loaded: uC 2.89, DSP 1.52. I've reviewed all the update information and there doesn't appear to be any changes that would modify the behavior of the DISP function. Mine works as described on page 23 of the KX2 manual Rev. A5 dated May 28, 2916: Special VFO B Displays -- Tap the DISP button and rotate the OFS/B knob to display the various parameters available. The "Log" function was added in uC 2.77 and isn't covered in my manual version but works as described in the Firmware Notes for that release.
You could consider reloading the firmware fresh from the Elecraft site or call Elecraft support and pose the question to them.
73, Brian, K0DTJ On 7/7/2019 08:10, Jim Danehy wrote:
I have owned my KX2 for some time now. I am now just now getting it on the air. I have a problem that I can not resolve. I have spent a few hours attempting to do that. When I try to bring up the DISPLAY function it does not work. The same button when held does work. Just the DISPLAY does not respond as it is supposed to do.
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
