Since the K3 EQs are a little cumbersome to adjust, I wrote a small python program a year or two ago:
http://udel.edu/~mm/ham/elecraft/eq.html The down side is that if you have another program querying the K3 while running this, commands and replies intersperse. I tend to run it to adjust the EQs, then stop it before running my logging program. I keep meaning to write a linux K3 proxy to avoid the avoid the issue, but I find it much easier to procrastinate. :-) To other python programmers, please feel free to enhance and share. 73, Mike ab3ap On Tue, Jul 23, 2019 at 12:23 PM Wayne Burdick <[email protected]> wrote: > Yes. So is the EQ on our other transceivers. > > EQ on the K4 will be more easily adjustable, with a much better user > interface, thanks to the large LCD. > > 73, > Wayne > N6KR > > ---- > elecraft.com > > > On Jul 23, 2019, at 8:35 AM, Richard Donner <[email protected]> > wrote: > > > > Does anyone know if the equalizer on the K4 is going to be adjustable > > real time so that you can listen to a station and adjust the equalizer as > > you listen to the station. > > Richard > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
