Ben, You no longer have to worry about the KAT500 stopping the K3 power on. That was fixed in a 4.xx firmware update eons ago. If you have a 5.xx firmware version in your K3 you have nothing to worry about. As far as I know there never was an issue with the KPA500. I never had any issues with my KPA500 and after loading the updated firmware no issue with my KAT500 either.
73, Mark, WB9CIF -----Original Message----- From: elecraft-boun...@mailman.qth.net <elecraft-boun...@mailman.qth.net> On Behalf Of w4sc Sent: Thursday, August 8, 2019 20:06 To: Elecraft@mailman.qth.net Subject: [Elecraft] KPA500 - KAT500 stopping K3 boot Is there an issue with the KPA500 being OFF with power up -> booting of the K3? Does it need to be actually powered up, i.e. and in operational state? OR is just having it in the “sleeping” state (REAR switch ON, FRONT PANEL SW-OFF) OK? I know about KAT500 and AUX-BUSS stopping K3 bootup, and have an “automatic” solution that works great. Ben W4SC Sent from Mail for Windows 10 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to markmus...@outlook.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
