Well, if you overdrive it in operate mode it just drops out to standby. So no problem there (I wouldn't make a habit of it though). As far as 200 watts in standby I will have to defer to the group.
On Wed, Aug 21, 2019 at 10:16 PM Tom <[email protected]> wrote: > HI, > I am setting up a multi-radio to one antenna switch and to get the maximum > flexibility I would like to pass all of them through a KPA500 / KAT500 > combination. So several radios connected to a switch, the output of the > switch to the input of the KPA500 and from there out to the KAT500. > All of the radios are under 100W but one is 200W. Will this be an issue > with the KPA500 in bypass? > A related question, what if I accidently put the 200W in in operate? Just > covering all my bases here. > Thanks, Tom > Va2fsq.com > > > --- > This email has been checked for viruses by Avast antivirus software. > https://www.avast.com/antivirus > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
