I haven’t tested it, but I recall that the delay is shortened if you use QRQ mode. With the K3S synthesizer, you really don’t need QRQ mode for reasonable hand sending speeds, so turn it off in the menu.
Victor 4X6GP > On 23 Aug 2019, at 17:28, Peter Chamalian <[email protected]> wrote: > > I received a report of what seemed to be hot switching artifacts when > running QSK with my SPE 2K amp. The K3S was set for the default TX Delay > but the friend who reported the issue later found an email from Wayne > indicating there was some issue with the default TX Delay of 8ms actually > being more like 5ms which would explain the issue. > > > > I've not seen anything more about this and wonder if I've missed something > or Elecraft still working on it? > > > > In the interim I've increased the value from 8ms to 11ms which should put it > in line with the actual 8ms default. > > > > > > Pete, W1RM > > [email protected] > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
