Ken, The knurled handle screw supplied with the KXPD1 is what keeps the key secured to the KX1 and should prevent 'wiggling'. If it does not, look for something projecting on the back of the paddle - you may not have tightened the jack body adequately into the paddle base - the shoulder of the jack should be flush with (or recessed slightly below) the aluminum block of the paddle.
73, Don W3FPR > -----Original Message----- > > I must have done something wrong... When I plug the kxbd1 in it wiggles > too much.. > > Should I have screwed the knerled nut on the key jack? The jack > on my kx-1 > is flush with the upper conver so the nut wont screw on. > Suggestions to solve the case of the wiggling KXBD1 > > thanks > > Ken K1UM > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
