Either would work, especially since you need an ATU to match on 40 and 30 meters anyway.
The ATU requirement is clearly spelled out in the product info -- hope no one missed this :) Short whips can be very narrow banded. Wayne N6KR > On Aug 28, 2019, at 4:36 PM, MaverickNH <[email protected]> wrote: > > I see note to attach the radials to the transceiver near the antenna jack. If > using a short coax to mount the antenna on THE Elecraft tripod base, is > connecting radials to that base preferred or is connecting them to the > transceiver still advised? I use the Elecraft AX1 radial and a separate > radial cut for 20m now, connected to the antenna base rather than KX2 > chassis. I'll probably make another 40m radial and mark it to roll for 20m. > > Bret/N4SRN > > > > -- > Sent from: http://elecraft.365791.n2.nabble.com/ > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
