> I recently bought a two-band K1, s/n unknown. > It puts out 6W on 40m, but only one watt on 20m, > measured with a WM-2...
The most likely problem is misalignment of band 2 of the KFL1-2. Perform a realignment of the 20m portion per the K1 manual. Don't waste too much time optimizing the settings of the KFL1-2 for maximum receiver sensitivity. The same inductances must be adjusted for maximum transmitter power output, and those adjustments are far far more critical. OR...for a direct simple shortcut, put the K1 on 20m in TUNE mode and peak L3, L4, L7, and L8 for maximum power output. Mike / KK5F ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
