I don't understand the problem. When the K3 is set for Digital A, it
sets USB and uses the Line Input. To switch from LSB to a digital mode,
all you need is to change the Mode (the rocker switch). Elecraft radios
can be set to remember settings by Mode, so when you switch, you return
to your last used settings. I use VOX for all digital modes and voice,
which further simplifies things.
73, Jim K9YC
On 9/20/2019 1:29 PM, RALPH TURK wrote:
I can not use the digital modes because I need to switch to Upper SB after the
last
electron has been sent in the digital mode and the reverse. Call is instant
break in
between USB voice and digital M110 A
This could be a deal breaker on a K4 purchase.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
