Thank you Frank, W3LPL, as you placed me on the right path. It turns out the
mic setting was fine, it was my settings on the Navigator interface that I must
messed up. All is now well.Thanks again,Bill - W0BBI
On Thursday, October 24, 2019, 11:00:32 AM CDT, Bill Wiehe
<[email protected]> wrote:
I recently noticed when operating in any of WSJT-X modes, such as FT8, the
power output on the K3starts out lower than what is initially set then rises to
the set power level over the first five to eight seconds of transmitting.The
power change is not indicated on radios meter, only my external meter(s).I have
checked to see if the same thing occurs in other modes (RTTY, CW, SSB, etc) and
it does not. I don't believe it is a K3 issue but I wanted to check and see if
perhaps someone else has had a similar experience.Thanks, Bill - W0BBI
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
