I would check the block diagram and/or the schematic to be sure but I think the standby/operate switch only disables/enables the PTT/keying line. Ken WA2LBI LG G6 ------ Original message------From: Don WilhelmDate: Sun, Oct 27, 2019 13:00To: Macy monkeys;[email protected];Cc: Subject:Re: [Elecraft] KPA500...standby vs. operateJohn,
I do not think there is any harm in leaving it in operate. If you are really "pinching pennies" on the electric bill, you might find a small advantage to switching it to standby. 73, Don W3FPR On 10/27/2019 12:36 PM, Macy monkeys wrote: > I am in and out of the shack all day with various nets and ragchews. Is there > any advantage to putting the amp into standby between QSOs...or should I just > leave it in operate? > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
