Jim; Check the AUXIO cable to make sure it connects to the K3S and the KPA500 (or KAT500) properly. This sounds like the Band1 signal may not be making proper contact.
The KPA500 watches the K3S’s Band signals for its band selection when RADIO is set to K3. If doesn’t see the combination for a band, then it will select the wrong band. It is possible that the K3 is outputting transverter band info, but since it changes with HF band, it doesn’t seem likely. The cable issue seems most likely at present. You might remove the connectors and make sure no pins are bent and that the pins are making proper contact. 73! Jack, W6FB > On Oct 30, 2019, at 12:57 PM, Jim Sheldon <[email protected]> wrote: > > Having a bit of trouble with the KPA500 following the bands out of the K3S. > For some reason, the other day I accidentally hit a button combination on the > K3S (not sure what I hit) and the KPA500 is now thinking 7.0 MHz is 1.8 and > some of the other bands aren't switching correctly either. I can't find the > command or whatever might cause this in the documentation I have. It's been > working properly since I got it some years ago. > > Anybody have any ideas before I call Elecraft and bother the busy support > staff? > > Thanks, > > Jim Sheldon, W0EB > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
