Also check your filter, NB and NR settings, sometimes they go wonky.
Rick NK7I
On 11/7/2019 8:26 AM, Bob McGraw K4TAX wrote:
Check all connectors. I've found that connectors that just "sit" and
are never moved will oxidize and prevent signal flow. They rely on a
mechanical connection only. Just unplug and re-plug 2 or three times
for each one.
73
Bob, K4TAX
On 11/7/2019 10:12 AM, Mike Flowers wrote:
Hi Folks,
I powered up my trust K3 #2257 this morning and found it deaf. The RF
and
IF stages appear to be working just fine. I have 20M FT8 showing
lots of
signals on my P3, but no audio.
WSJT-X shows no audio from LINE OUT either.
I'm on the right antenna and haven't fiddled with parameters for
months, so
I am wondering if there is anything I might try/check before taking
it over
to Watsonville for repairs.
Thanks!
- 73 and good DX de Mike, <http://www.qrz.com/db/k6mkf/> K6MKF, NCDXC
<https://www.ncdxc.org/> Secretary
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to rmcg...@blomand.net
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to rick.n...@gmail.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com