Hi Wayne, Do you have any information about:
1. Sensitivity or noise floor of the K4 relative to the K3S? 2. Noise blanking and noise reduction effectiveness relative to the K3S? In the regard, will noise reduction be disabled on digital modes as does the K3S? 73, John WA1EAZ > On Nov 10, 2019, at 3:33 PM, Wayne Burdick <[email protected]> wrote: > > >> Art Suberbielle <[email protected]> wrote: >> >> Wondering if the K-4 will remember settings of RF/AF gain per band? > > Hi Art, > > RF gain and squelch are per-band, per-receiver, as are the preamp and > attenuator controls. > > There's an AF gain control for each receiver that applies to all bands. > > >> Also, what amount of reduction in db will the Attenuation provide? > > Attenuation ranges from 0 to 21 dB in 3 dB steps. There are also three preamp > settings per band (off, 1, 2). > > 73, > Wayne > N6KR > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
